About Serial And Usb Communications; Connect The Intermec Sr30 Or Sr61T Usb Scanner - Intermec CV41 User Manual

Chapter 4 — Configure the Computer

About Serial and USB Communications

54
1 Tap Start > Settings > Control Panel > Bluetooth Printing.
2 Select Search, Manual, Previous Devices, or Bluetooth COM
Port.
3 Tap Acquire Printer. Follow the onscreen instructions to select
the current wireless printer.
4 (Optional) Tap Print Test Page. The printer prints out a test page.
Use a serial or USB cable to transmit and receive data from another
device through se rial or USB communications. If you are using a USB
cable, you must purchase a USB Y-Cable. For more information,
contact your local Intermec representative.

Connect the Intermec SR30 or SR61T USB Scanner

By default when an HID-enabled USB scanner is connected to the
computer, the scanned data is transmitted to an active window as
keystroke messages and bypasses the Intermec data collection wedge.
Any data handling that is applied to the scanned data, such as strip
leading or trailing characters must be programmed into the scan
engine. You can program your scanner by:
• scanning configuration bar codes from the manufacturer .
• installing an application that accepts the incoming data.
Once connected, configure the scanner parameters through the
computer. If you are using an Intermec scanner, configure it using
EasySet. For more information, go to www.intermec.com/EasySet.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual