Chapter 1 — About the Computer
About the CV41 Startup Behavior
Select a Startup Behavior
10
Change the startup behavior so that the computer can be turned on
and off through the ignition input signal of a vehicle or when power is
applied to the smart dock. For more information about the startup
behavior, see the following table.
CV41 Startup Behavior Descriptions
Startup Behavior Description
Standard
The computer is turned on and off manually using the
Power button on the computer.
Ignition control
When vehicle power is applied, the computer turns on.
Make sure that the:
•
•
Auto-On
The computer is turned on when power is applied:
•
•
By default the computer startup behavior is set to standard. If you
intend to startup your computer using ignition control or auto-on,
make sure you wire the ignition input wire according to the
Vehicle Mounting Kit Reference
You must wire the ignition input wire before enabling ignition
control or auto-on.
1 Tap Start > Control Panel > AutoOn. The Ignition and Auto-On
Properties screen appears
2 Select the startup behavior.
3 Tap OK.
CV41 Vehicle Mount Computer (Windows Embedded Standard) User Manual
power switch on the smart dock is on.
the ignition input wire is connected.
power switch on the smart dock is on.
the ignition input wire is connected.
Guide.
CV41