Memory Configuration Submenu; Advanced Chipset Control Submenu - NEC Express5800/120Rf-2 User Manual

Memory Configuration Submenu

Choices or
Feature Display Only
Extended 1 MB
Memory Test
1 KB
Every-Location
Disabled
DIMM Bank #1 Installed
- #3
Disabled
Not Installed
Memory Disabled
Retest
Enabled

Advanced Chipset Control Submenu

Feature
Wake on Ring
Wake on LAN/
PME PCI-XB
Wake on PME
PCI-XC
Wake on RTC
Alarm
3-10 Configuring Your System
Description
Extended memory test options run during
POST.
1MB: Tests every 1-MB memory.
1KB: Tests every 1-KB memory.
Every-Location: Tests every memory location.
Disabled: Initializes memory.
Indicates the current memory status.
"Normal" indicates the normal status, "Error"
indicates a memory error, and "None"
indicates no DIMM installed (view only).
Bank #1 indicates DIMMs in DIMM sockets
#1A and #1B.
Bank #2 indicates DIMMs in DIMM sockets
#2A and #2B.
Bank #3 indicates DIMMs in DIMM sockets
#3A and #3B.
(Memory is interleaved so that two DIMMs
are used per bank.)
Clears memory error information and retests
all DIMMs on the next system boot. This
option will be automatically reset to
[Disabled] on the next system boot.
Description
Choices or
Display Only
Disabled Enables or disables the remote
power-on features via serial port
Enabled
(modem).
Disabled
Enables or disables the remote
power-on features via network or PCI
Enabled
device (PCI Power Management
Enable wake up event).
Disabled Enables or disables the remote
power-on features by PCI device (PCI
Enabled
Power Management Enable wake up
event) installed to the PCI riser C.
Disabled Enables or disables the remote
power-on features using RTC Alarm
Enabled
features.
Your Setting
Your Setting