Upper Cover - Brother MFC620CN Service Manual

5.1.7

Upper Cover

(1) Remove the four screws from the upper cover.
(2) Release the five retainers provided on the upper cover and lift up the upper cover.
Retainer
Reassembling Notes
• When mounting the upper cover:
Make sure that the head/carriage unit is placed in the head capping position to prevent the ink
supply tubes from getting crushed between the upper and lower covers.
Take care not to deform the PF encoder disk.
Be careful not to pinch the ink absorber box. If pinched, the ink absorber box presses down the
paper pressure holder (shown on
Retainer
Upper cover
page 5-64), resulting in a paper jam.
5-26
Taptite, bind B
M4x12
Retainer
Lower cover
Retainers
Confidential