Brother MFC620CN Service Manual page 222

[ 9 ] Align vertical print lines.............................................................................. 6-28
[ 10 ] Margin adjustment in near-edge printing................................................... 6-28
[ 11 ] Adjust the light intensity of the LCD backlight (for models
with backlights) .......................................................................................... 6-28
[ 12 ] Load the firmware designed for the corresponding model to the flash
ROM (Required for the MFC210C U.S.A./Canadian models)................... 6-28
[ 13 ] Switch back to standby (Required for the MFC620CN/425CN/420CN
/410CN) ..................................................................................................... 6-28
6.4 IF YOU REPLACE THE INK ABSORBER BOX........................................................... 6-29
Reset the purge counter to zero with the following procedure. ........................... 6-29
6.5 IF YOU REPLACE THE CONTROL PANEL PCB (MODELS WITH BACKLIGHTS).. 6-30
Adjust the light intensity of the backlight.............................................................. 6-30
6.6 IF YOU REPLACE THE SCANNER UNIT .................................................................... 6-30
Input the type of the CIS (Required for the MFC620CN/425CN/420CN/215C,
DCP315CN/120C/117C/115C,MFC210CU.S.A./Canada models) ........... 6-30
Confidential