1.1
Rear Cover
(1) FAX8350P and FAX8750P: Remove the sub rear cover.
(2) Remove the three screws (two "a" and one "b") from the rear cover. Screw "b" is provided on
those models available with a 2nd paper cassette (as an option or standard).
(3) Lightly pressing sections "X," pull out the rear cover.
1.2
Access Plates R and F
(1) Remove screw "c" that secures access plates R and F together to the main chassis.
(2) Remove screws "d" and "e" from access plate R.
(3) Take out access plates R and F together.
(4) Remove screw "f" to separate those access plates.
n n
Reassembling Notes
•
When reinstalling access plate F, fit the two tabs provided on the front end underneath the
center edge of the main chassis.
"a" and "b": Screw, pan (washer) M4x10DB
"c," to "f": Taptite, cup S M3x6
IV - 4
manuals4you.com
manuals4you.com
(Tightening torque: 0.5 N•m)