Brother MFC620CN Service Manual page 465
Hide thumbs
Also See for MFC620CN:
- Network user's manual (71 pages) ,
- User manual (230 pages) ,
- Software user's manual (175 pages)
Table of Contents
Advertisement
Scanner Error Code
Define name
SCDIAG_OK
SCDIAG_FAIL
SCDIAG_NOT_INITIALIZE
SCDIAG_NOT_SUPPORT
SCDIAG_NOT_INSTALL
SCDIAG_NOT_CONNECTED
SCDIAG_NOT_FOUND_DEVICE
SCDIAG_NOT_FOUND_TWDS
SCDIAG_NOT_SELECT_TWDS
SCDIAG_TWAIN_SYSTEM_ERROR
SCDIAG_STIDEVICE_CREATE_FAIL
SCDIAG_STI_SYSTEM_ERROR
SCDIAG_WIADEVICE_CREATE_FAIL
SCDIAG_WIA_SYSTEM_ERROR
SCDIAG_OPEN_ERROR
SCDIAG_WRITE_ERROR
SCDIAG_READ_ERROR
SCDIAG_TIMEOUT
SCDIAG_NO_RSM
Error Code
0
The processing is completed or confirmation is successful.
1
The system stopped processing due to errors which don't fall into ones above, such as the lack of memory.
2
The system tried to run functions without the initialization processing.
3
This Scanner driver type doesn't support the function which is tried to run, This confirmation of the function is not necessary.
4
The specified device is not installed.
5
The specified device is not connected. (only USB connection)
6
The specified device is not found, No device may be connected or may fail to install.
10
The specified TWAIN Data Source is not found, No device may be connected or may fail to install.
11
The TWAIN Data Source Manager fails to recognize the default TWAIN Data Source.
12
The TWAIN Data Source Manager to use the TWAIN protocol is not available.
The TWAIN Data Source Manager may not exist.
20
The system failed to create the STI device.
The STI/WIA service or the minidriver may have problems.
21
The STI Interface (IStillImage) is not available.
The STI service may not start or the operation system may have problems.
30
The system failed to create the WIA device.
The WIA service or the minidriver may have problems.
31
The WIA Service (IWiaDevMgr Interface and so on) is not available.
The WIA service may not start or the operation system may have problems.
40
The system failed to open the scanner device.
The attempt may be rejected because the object device is running or so.
41
The system failed to send the scanner command.
42
The system failed to read the data from the device.
43
The system failed to receive the response after the request has timed out.
44
The system failed to recognize the Resource Manager and failed to restart.
The Resource Manager may not be installed or running incorrectly.
Contents
Scanner Error Code
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
