Embedded And Full Maintenance Programs - Brother MFC620CN Service Manual

6.1.3 Embedded and Full Maintenance Programs

The maintenance program embedded in some models (MFC210C U.S.A./Canadian models only) is
a part of the full maintenance program as shown in the table below.
If you need to use functions not supported by the embedded maintenance program (e.g., 09, 12,
54, ...), temporarily load the full maintenance program via the work PC to the flash ROM of the
machine to be repaired.
NOTE: After repair, be sure to load the latest version of the firmware designed for the
corresponding model to the machine.
Maintenance-mode functions
"Embedded maintenance program" supports:
(User-accessible)
Maintenance-mode functions
"Embedded maintenance program" supports:
(User-accessible)
01 05 09 10 11 12 13 32 53 54 55 58 59
√ √ √ √ √ √ √
(√) (√) (√)
63 65 66 68 69 74 76 80 82 87 91 99
√ √ √
(√)
6 - 6
√
(√)
√ √ √ √ √ √ √
(√) (√) (√) (√) (√)
Confidential