Table of Contents
Advertisement
Phase 3 to 5
• Time Saver LED on (Top), 15 beeps
• Soak LED on (Middle), 5 beeps (default)
• Water Saver LED on (Bottom), 0 beeps
To return Smartdrive to Normal operation, press the POWER button.
Adjusting the Volume of Water Used in the Water Saver
Option (GW only) – Phase 3 to 5
The volume of water added during the shower rinse on the Water Saver
option can be increased or decreased. Enter the Option Adjustment Mode.
Use the WATER LEVEL buttons to select the volume of water to be used in
the shower rinse.
• HIGH WATER LED ON, more water.
• MED WATER LED ON, Default set water volume.
• LOW WATER LED ON, less water.
Press POWER to return to normal mode.
Auto Water Fill Level Adjustment (GW only) Phase 3-5
If the user is not satisfied with the level that Smartdrive fills to on auto water
level, they can increase or decrease the fill level that auto will select.
NB. If there is not enough water for the load, we recommend you check by
pausing Smartdrive and pushing the clothes down to see how much spare
water is at the bottom of the bowl. Clothes often float and Smartdrive can
sense the water under the clothes. Enter the Option Adjustment Mode. Use
the cycle buttons to increase or decrease the amount of water selected.
• FAVOURITE LED on, less water
• PERM. PRESS LED on, default set level
• WOOL LED on, more water +
• DELICATE LED on, more water ++
• REGULAR LED on, more water +++
12
Hide quick links:
Advertisement
Table of Contents
