Function Time Out; Oob Hit Greater Than Max For 5 Seconds; Stepper Test Failure - Fisher & Paykel SmartDrive Service Manual

Smartdrive washing machine
Hide thumbs Also See for SmartDrive:
Table of Contents

Advertisement

241. (11110001) Phase 6 - Function Time Out
Display crashed.
Primary Fault:
Action:
Secondary Fault:
Action:
242. (11110010) Phase 6 - OOB Hit Greater Than Max for
Out Of Balance warning to the user. Additional fault code for Phase 6.
Primary Fault:
Action:
243. (11110011) Phase 6 - Stepper Test Failure
Rotor Position Sensor Fault.
attempted a motor step test and found the motor has not stepped to
the correct position.
Primary Fault:
Action:
Display has failed.
Replace Display Module.
Motor Control Module has failed.
Replace Motor Control Module.
5 Seconds
SmartDrive has detected the bowl movement to
be excessive or the Micro switch is permanently
on or harness to it is disconnected.
See fault code 43 for details.
Wiring.
See fault codes 53 and 54.
50
The Motor Control Module has

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents