Lid Switch Test (Phase 5 Only) - Fisher & Paykel SmartDrive Service Manual

On Phase 5, the Machine Status
screen displays the thermistor
temperature and the status of the
out of balance switch and the lid
switch. It also displays the Size
setting of the SmartDrive and the
water level.
On Phase 6, the Machine Status
screen displays the status of the
diverter and the out of balance
switch. It also displays the Size
setting of the SmartDrive and the
thermistor temperature.
HVDC is for on line testing in the
factory.
Target temp is the temperature
selected.
T is the actual temp of the inlet
chamber water.
The Fault Status screen will display
a code for the last fault that has
occurred in the SmartDrive. It will
also display how many cycles ago
the fault occurred and at what part
of the cycle.
See Detailed Fault Codes for
servicing tips.
The fault code number can now be checked in the detail fault codes, to
ascertain what repairs may be necessary.

Lid Switch Test (Phase 5 Only)

Enter the Diagnostic Mode and bring up the Machine Status display.
Activating the lid switch by opening and closing the lid will change the display
between "Lid closed" and "Lid Open".
15