517790D
1.7
Water Valves
Supply
Mode of Operation
Cold
Digitally Operated
Hot
Digitally Operated
Note: Flow rate will vary slightly depending on pressure.
Operating pressures:
Note:
Pressures below 34kPa (5psi) can create seating problems with the internal
diaphragm of the valve, and may cause water to drip into the inner bowl when the machine
is not in use.
1.8
Thermistor (GW Only)
NTC-type temperature sensor (Thermistor)
1.9
Cabinet
Pre-painted steel
1.10
Lid
ABS plastic (co-injected)
1.11
Top Deck
Polypropylene
1.12
Inner Bowl
Stainless steel: Grade 430T
Bowl base and balance ring: Polypropylene
Inner Bowl Weights
Compact
Medium
Large
Inner bowl speed
Fast Spin
Medium Spin
Slow Spin
Stir Speed
1.13
Outer Bowl
Aluminium insert over-moulded with polypropylene
1.14
Console
ABS plastic with ABS plastic insert for display module.
1.15
Agitator
Polypropylene
Voltage
24V DC
24VDC
Maximum 1034 kPa (150psi) / Minimum 34 kPa (5psi)
7.303kg +/- 225g
9.225kg +/- 175g
10.480kg +/- 275g
1,000 RPM
670 RPM
300 RPM
25 RPM
Resistance
o
64Ω @ 20
C
o
64Ω @ 20
C
Resistance 10,000Ω @ 25
7
Flow Rate
16 litres per minute
10 litres per minute
o
C