6.
Tape the edge of the ribbon to the core.
7.
Close the Paper Cover – it clicks into place.
Close the Ribbon Cover
8.
Removing the Ribbon
To remove a full ribbon core,
1.
Open the Ribbon Cover.
Push the left side of the full ribbon core to the right.
2.
Lift the left side out then the right side.
3.
4.
Open the paper cover.
Push the left side of the empty ribbon core to the right.
5.
6.
Lift the left side out then the right side. Save the empty core to use for the next ribbon take up.
Classification: Avery Dennison – Public
10