16
3.3 Unpacking
3.3.1 Removing the printer from the carton
Classification: Avery Dennison - Public
1.
Open the carton by removing the banding straps.
2.
Cut the tape seam on the top of the carton.
3.
Remove top foam-packing layer (see Figure 2A).
4.
Remove any individual pack components like the supply unwind arbor.
Figure 2A – Shipping Carton
CAUTION: Do not discard any of the packing / shipping
material in case you have to move the printer to another
location or return it to AVERY DENNISON for service.
5.
The printer has been wrapped with plastic to protect the printer from the
packing material and moisture.
6.
It requires 2 people to remove the printer from the carton.
Figure B
7.
Lift the outer packing sleeve from the base (see Figure B) above.
8.
Unpack the unwind arbor from its box and place it on the workstation
table next to the printer. Refer to Section 2.5.6 Attaching the Unwind
Assembly & Refer to Section 2.5.1, Attaching the Stacker.
User's Manual—SNAP™ 700 Printer