Removing The Transportation Lock - Avery Dennison AP 4.4 User Manual

05/04 Rev. 1.2-03
1. Open the printer lid.
2. Remove the cable tie holding the printhead in place (see Fig. 7). For this,
AP 5.4 Dispen-
ser
USER MANUAL
AP4.4 – AP5.4
Fig. 6: These housing parts are shipped loose with the „AP 5.4 Dispenser".

Removing the Transportation Lock

use side-cutting pliers or strong scissors.
CAUTION! Do not use a knife to cut the cable tie! The printhead could be
damaged by the resulting force when splitting the tie!
Fig. 7: AP 4.4/5.4 transportation lock (1).
Remove the connector from its transport position at the printer bottom and
connect it to the connector at the frontside of the printer.
5
Setup & Operation