Motion Detector Event Action (Record) Setup Screen; Figure 3-36 Alarm In Event Action (Notify) Setup Screen; Figure 3-37 Motion Detector Event Action (Record) Setup Screen - Honeywell HRHD 410 User Manual

Configuration
1.
2.

Motion Detector Event Action (Record) Setup Screen

Use this screen to set the DVR to react to motion detection differently than other events.
You can assign each camera a schedule, associated camera, recording speed, video
quality, and dwell time.
Rev 3.03
Figure 3-36
Highlight the Sched box and then press
schedule as described earlier.
Highlight the Notify box and then press
When it is On, the DVR notifies the remote site when certain events occur based
on a defined schedule.
Note For the Notify action to work, the DVR should be registered in the
RAS (Remote Administration System).
Figure 3-37
Alarm In Event Action (Notify) Setup Screen
. A schedule screen displays. Set the
. This toggles between On and Off.
Motion Detector Event Action (Record) Setup Screen
51 Document 900.0315
02/07