Login To Web Manager - D-Link DES-3326SR Manual

Login to Web Manager

To begin managing the Switch simply run the browser you have installed on your computer and point it to the IP
address you have defined for the device. The URL in the address bar should read something like:
http://123.123.123.123, where the numbers 123 represent the IP address of the Switch.
In the Welcome page, click on the Login hyperlink; this opens a login screen. Enter a user name and password to
access the Switch's management main page (pictured above). There is no user name or password configured for
the Switch in the default settings, so if this is the first time logging in it is not necessary to enter these.
Web Pages and Menus
Menus for configuration and information are organized in two folders or directories, Basic Setup and Advanced
Setup. These folders contain all the menus and subdirectories used to configure, manage and view information
for the DES-3326SR.
The Basic Setup directory includes the SNTP Settings, Network Management, Switch Utilities and Network
Monitoring subdirectories as well as the menus for Switch Information, Basic Switch Setup (includes IP
settings), Serial Port Settings, Port Configuration, Port Security Settings, Traffic Segmentation, User
Accounts, Factory Reset, Save Changes and Restart System.
Advanced Setup includes subdirectories for Spanning Tree, MAC Notification, Forwarding, Configure QoS,
VLAN Configuration, Link Aggregation, 802.1x, System Log and Layer 3 IP Networking. Other menus
included are (Port) Mirroring Configuration and Access Profile Mask Setup.
D-Link DES-3326SR Layer 3 Switch
NOTE: The Factory default IP address for the Switch is 10.90.90.90.
NOTICE:
Any changes made to the Switch configuration during the current
session must be saved in the Save Changes web menu (explained below) or use
the command line interface (CLI) command save.
NOTE: Configure the user name and password in the User Accounts
menu before connecting the Switch to the greater network.
34