D-Link DES-3326SR Manual page 96

Parameter
Profile ID
Access Profile
VLAN
Source MAC Mask
Destination MAC
Mask
802.1p
Ethernet type
Click Apply to set this entry in the Switch's memory.
IP-based CPU Interface Filtering Mask:
Select the IP option from the Access Profile pull-down menu to view the following:
Figure 14- 10. CPU Interface Filtering Configuration window- IP
D-Link DES-3326SR Layer 3 Switch
Description
Type in a unique identifier number for this profile set or allow an ID to be
automatically assigned by checking the Auto Assign option. This value can be
set from 1 – 255. The profile ID sets the relative priority for the profile and
specifies an index number that will identify the cpu access profile being created
with this command. Priority is set relative to other profiles where the lowest
profile ID has the highest priority.
Select profile based on Ethernet (MAC Address) or IP address. This will
change the menu according to the requirements for the type of profile. Select
Ethernet to instruct the switch to examine the layer 2 part of each packet
header. Select IP to instruct the switch to examine the IP address in each
frame's header.
Selecting this option instructs the switch to examine the VLAN part of each
packet header and use this as the, or part of the criterion for forwarding.
Enter a MAC address mask for the source MAC address.
Destination MAC Mask - Enter a MAC address mask for the destination MAC
address.
Selecting this option instructs the switch to examine the 802.1p priority value of
each packet header and use this as the, or part of the criterion for forwarding.
Selecting this option instructs the Switch to examine the Ethernet type value in
each frame's header.
86