D-Link DES-3326SR Manual page 153

Choose a name for the interface to be added and enter it in the Interface Name field (if you are editing an IP
Interface, the Interface Name will already be in the top field as seen in the window above). Enter the interface's
IP address and subnet mask in the corresponding fields. Pull the Active pull-down menu to Yes and click Apply
to enter to make the IP interface effective. Use the Save Changes dialog box from the Basic Setup folder to
enter the changes into NV-RAM.
The following fields can be set:
Parameter
Interface Name
IP Address
Subnet Mask
VLAN Name
Active <Yes>
Switch
Port/Member
D-Link DES-3326SR Layer 3 Switch
Description
This field displays the name for the IP interface. The default IP interface is
named "System".
Enter an IP address to be assigned to this IP interface.
Enter a subnet mask to be applied to this IP interface.
Enter the VLAN Name for the VLAN the IP interface belongs to. The VLAN
name must match the existing
This field is toggled between Yes and No using the space bar. This entry
determines whether the interface will be active or not.
This drop-down menu allows the selection of an individual switch from a
switch stack, if you have the optional stacking module and have properly
interconnected the switches in the stack.
Specify which of the ports on the Switch will be a member of this VLAN.
143