D-Link DES-3326SR Manual page 187

To set up an OSPF Area configuration click the OSPF Area Settings link to open the following dialog box:
The first OSPF Area Setting screen displays a summary of all of the OSPF areas defined on the switch. OSPF
areas can be added, edited, or deleted from this screen.
To add an OSPF area to the switch, click on the New button:
To edit an existing OSPF area definition, select the area from the OSPF Area Setting screen, and then click the
Edit button:
The following fields can be set or are displayed:
Parameter
Area ID
Type
Stub Import
Summary LSA
Default Cost
D-Link DES-3326SR Layer 3 Switch
Figure 24- 5. OSPF Area Setting
Figure 24- 6. OSPF Area Setting − Add
Figure 24- 7. OSPF Area Setting − Edit
Description
A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that
uniquely identifies the OSPF area in the OSPF domain.
This field can be toggled between Normal and Stub using the space bar.
When it is toggled to Stub, additional fields appear − Stub Import Summary
LSA, and Default Cost.
Displays whether or not the selected Area will allow Summary Link-State
Advertisements (Summary LSAs) to be imported into the area from other
areas.
Displays the default cost for the route to the stub of between 0 and 65,535.
The default is 0.
177