D-Link DES-3326SR Manual page 93

The following window is used for the IP Rule configuration.
Configure the following Access Profile Rule - IP settings:
Parameter
Permit/Deny
Access Rule ID
Source IP
Destination IP
priority
replace_priority
replace_dscp:
D-Link DES-3326SR Layer 3 Switch
Figure 14- 6. Access Profile Rule Configuration – IP
Description
Select Permit to specify that the packets that match the access profile are
forwarded by the switch according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are
not forwarded by the switch and will be filtered.
Adds an additional rule to the above specified access profile. The value is used
to index the rule created.
Enter an IP address for the source IP address.
Destination IP - Enter an IP address for the destination IP address.
Select this option to instruct the switch to use the 802.1p priority value entered
in the adjacent field for packets that meet the criteria. A number between 0 −
lowest priority, and 7 − highest priority, can be entered.
Select this option to instruct the switch to replace the 802.1p value (in a packet
that meets the selected criteria). In this way, packets meeting the criteria can
have their priority handling modified for use within the switch, and then have a
different priority value assigned when they leave the switch.
Select this option to instruct the switch to replace the DSCP value (in a packet
that meets the selected criteria) with the value entered in the adjacent field.
83