D-Link DES-3326SR Manual page 169

Areas and Border Routers
OSPF link-state updates are forwarded to other routers by flooding to all routers on the network. OSPF uses the
concept of areas to define where on the network routers that need to receive particular link-state updates are
located. This helps ensure that routing updates are not flooded throughout the entire network and to reduce the
amount of bandwidth consumed by updating the various router's routing tables.
Areas establish boundaries beyond which link-state updates do not need to be flooded. So the exchange of link-
state updates and the calculation of the shortest path tree are limited to the area that the router is connected to.
Routers that have connections to more than one area are called Border Routers (BR). The Border Routers have
the responsibility of distributing necessary routing information and changes between areas.
Areas are specific to the router interface. A router that has all of its interfaces in the same area is called an
Internal Router. A router that has interfaces in multiple areas is called a Border Router. Routers that act as
gateways to other networks (possibly using other routing protocols) are called Autonomous System Border
Routers (ASBRs).
Link-State Packets
There are different types of link-state packets, four are illustrated below:
• Router Link-State Updates − these describe a router's links to destinations within an area.
•
Summary Link-State Updates – issued by Border Routers and describe links to networks
outside the area but within the Autonomous System (AS).
•
Network Link-State Updates – issued by multi-access areas that have more than one attached
router. One router is elected as the Designated Router (DR) and this router issues the network
link-state updates describing every router on the segment.
•
External Link-State Updates – issued by an Autonomous System Border Router and describes
routes to destinations outside the AS or a default route to the outside AS.
The format of these link-state updates are described in more detail below.
Router link-state updates are flooded to all routers in the current area. These updates describe the destinations
reachable through all of the router's interfaces.
Summary link-state updates are generated by Border Routers to distribute routing information about other
networks within the AS. Normally, all Summary link-state updates are forwarded to the backbone (area 0) and
are then forwarded to all other areas in the network. Border Routers also have the responsibility of distributing
routing information from the Autonomous System Border Router in order for routers in the network to get and
maintain routes to other Autonomous Systems.
Network link-state updates are generated by a router elected as the Designated Router on a multi-access segment
(with more than one attached router). These updates describe all of the routers on the segment and their network
connections.
External link-state updates carry routing information to networks outside the Autonomous System.
Autonomous System Border Router is responsible for generating and distributing these updates.
D-Link DES-3326SR Layer 3 Switch
159
The