Multicast Routing Configuration; Multicast Global Configurations - D-Link DES-3326SR Manual

Multicast Routing Configuration

Multicast Global Configurations

IGMP Snooping Settings
IGMP Interface Configurations
DVMRP Interface Configuration
PIM-DM Settings
Controlling Multicast Routing on the Switch includes setting up IGMP for IP interfaces, PIM and DVMRP. This
chapter describes how to set these up. For an explanation of how these protocols function, read Appendix C.
The functions supporting IP multicasting are added located in the IP Multicast Routing Protocols subdirectory
in the Layer 3 IP Networking folder.
Multicast Global Configurations
IGMP Snooping, DVMRP, and PIM-DM can be enabled or disabled on the switch without changing the
individual protocol's configuration.
To enable or disable IGMP Snooping, DVMRP, and PIM-DM globally on the switch:
From the Layer 3 IP Networking folder, click on the IP Multicast Routing Protocols link and then click on
the Multicast Global Configurations link to open the following dialog box:
IGMP Snooping, DVMRP, and PIM-DM routing protocols can be individually enabled or disabled, globally
on the switch − without changing the individual protocol's configuration from the above window.
D-Link DES-3326SR Layer 3 Switch
Figure 21- 1. Multicast Global Configurations
144
Chapter 21