The following window is used for the IP Rule configuration.
Figure 14- 13. CPU Interface Filtering Rule Configuration – IP
Configure the following CPU Interface Filtering Rule - IP settings:
Parameter
Permit/Deny
Access Rule ID
Source IP
Destination IP
D-Link DES-3326SR Layer 3 Switch
Description
Select Permit to specify that the packets that match the access profile are
forwarded by the switch according to any additional rule added (see below).
Select Deny to specify that packets that do not match the access profile are
not forwarded by the switch and will be filtered.
Adds an additional rule to the above specified access profile. The value is used
to index the rule created.
Enter an IP address for the source IP address.
Destination IP - Enter an IP address for the destination IP address.
89