Installing A Redundant Power Supply - D-Link DES-3326SR Manual

Installing a Redundant Power Supply

The DPS-200 is a redundant power-supply unit designed to conform to the voltage requirements of the switches
being supported.
CAUTION:
with installation of the DPS-200.
The DPS-900 is a standard-size rack mount (5 standard units in height) designed to hold up to 8 redundant power
supplies. These can be used with the DPS-200 and DPS-500 redundant power supplies, or a install a combination
of both types. For the DES-3326SR Layer 3 Switch, use the DPS-200.
D-Link DES-3326SR Layer 3 Switch
The AC power cord for the switch should be disconnected before proceeding
Figure 2 - 12. Install DPS-200 in DPS-900
Figure 2 - 13. Install DPS-900 in equipment rack
29