S I M P L E R E C O R D I N - Ganz Digimaster DR4HL Instruction Manual

SCHEDULE MODE : Either DAILY (one schedule will apply to every day of the week) or WEEKLY
Please note: When recording mode is simple mode, this option cannot be changed.
PRE EVENT RECORDING TIME : When the DVR is not in continuous recording mode, this setting
POST EVENT RECORDING TIME : When the DVR is not in continuous recording mode, this setting
SIMPLE RECORDING
The simple recording controls the quality, size and FPS for all cameras at the same time. Each channel can be
set for a single recording type(Continuous, Motion, Alarm)
RECORD QUALITY: Sets the video recording quality to Low, Standard, High or Highest for all cameras.
RECORD SIZE: Sets the video capture size for all camera to 352X240, 704X240, 704X480(NTSC) for all
cameras.
FPS: Sets the Frames per second for recording across all channels. The FPS for the channels can be set to
1,2,3,7,15 or
30FPS for NTSC, and 1,2,3,7,13 or 25FPS for PAL.
(each day of the week has its own schedule).
determines the amount of footage that is always recorded before an
event occurs. (motion detection, alarm input etc.)
determines the amount of footage that is always recorded after an
event occurs. (motion detection, alarm input etc.)
Click the SIMPLE RECORDING menu.
39