Ganz Digimaster DR4HL Instruction Manual page 23

PTZ properties can also be adjusted for each channel by selecting the
ENTER.
Note that some settings, such as AUTO FOCUS, may not be compatible with particular PTZ equipment.
If this is the case, changing this value will have no effect on PTZ control.
DISPLAY : MOTION SENSOR
on
SENSITIVITY : Between 1 (Lowest) and 10 (Highest) and determines the degree of motion required before
recording is activated.
AREA SETUP : Choosing this option allows the operator to define which areas of the image are monitored
for motion detection.
Blue grid squares represent detection areas.
value by button.
Click the MOTION SENSOR menu and decide the value
the SENSITIVITY menu.
Change the value by
Click the
23
icon and pressing
button.
button.