Ganz Digimaster DR4HL Instruction Manual page 36

Determine the behavior and actions that will trigger the internal buzzer.
Behavior settings
OPERATION : The internal buzzer can be enabled or disabled.
HDD EVENT : Determines whether a hard drive event sounds the buzzer.
MODE : Can be either TRANSPARENT (the buzzer sounds only when the trigger criteria is present)
or LATCHED (the buzzer sounds for a set period of time after the trigger).
DURATION : In LATCHED mode, the time that the buzzer sounds after it has been triggered.
Action settings
ALARM : Determines whether alarm inputs will sound the buzzer.
VIDEO LOSS : Determines whether video loss on any of the selected channels will sound the buzzer.
MOTION : Determines whether motion detection on any of the selected channels will sound the buzzer.
Remember to select "APPLY" and press ENTER to save all settings before exiting these menus
EVENT / SENSOR : EMAIL NOTIFICATION
Determine the behavior and actions that will send an email to a remote user.
Behavior settings
Click the BUZZER OUTPUT menu and click
each value.
Then, click the value by
Click the EMAIL NOTIFICATION menu and
click the each value.
Then, check the usage by clicking.
36
button to change.