H D D E V E N; Buzzer Out - Ganz Digimaster DR4HL Instruction Manual

Determine the behavior of each of the 4 alarm inputs.
OPERATION: Alarm inputs can be enabled or disabled.
TYPE: Alarm inputs can be set as normally open (N/O) or normally closed (N/C).
EVENT / SENSOR: ALARM OUTPUT
Determine the behavior and actions that will trigger each of the 4 alarm outputs.
Behavior settings
OPERATION : The selected alarm output can be enabled or disabled.
HDD EVENT : Determines whether a hard drive event triggers the alarm output.
MODE : Can be either TRANSPARENT (the output is active only when the trigger criteria is present) or
LATCHED (the output is active for a set period of time after a trigger).
DURATION : In LATCHED mode, the time that the alarm output remains active after it has been triggered.
Action settings
ALARM : Determines whether alarm inputs would trigger the alarm output.
VIDEO LOSS : Determines whether video loss on any of the selected channels will trigger the alarm output.
MOTION : Determines whether motion detection on any of the selected channels will trigger the alarm output.
Remember to select "APPLY" and press ENTER to save all settings before exiting these menus
EVENT / SENSOR : BUZZER OUT
Click the ALARM OUTPUT menu and click
each value. Then, click the value by
button to change.
35