PROTOCOL: Must be set by Control Device.
BAUD RATE: Must be set to match the baud rate of the PTZ controller.
EVENT / SENSOR
To setup the various event handling options, highlight EVENT/SENSOR and press ENTER
EVENT / SENSOR: HDD EVENT
DISK FULL EVENT: If it sets to "ON" alarm output and buzzer are activated when HDD
becomes full.
EVENT / SENSOR : ALARM INPUT
OPERATION
Click the HDD EVENT menu.
Then, click the value by
Click
the
ALARM
and TYPE value.
Then click the value by
34
button to change.
INPUT
menu
and
button to change.
click
the