Control Device - Ganz Digimaster DR4HL Instruction Manual

Caution: If you try to factory default, system will ask to format after finishing the factory default.
SYSTEM DATA : System settings can be saved to a USB memory stick. The settings can be reloaded
in case of accidental factory reset or can be transferred to another DVR if multiple
units need to be installed with the same settings.
After loading the configuration data, system will be rebooted
SYSTEM : CONTROL DEVICE
This will allow up to 254 DVRs to be controlled from the same keyboard.
SYSTEM ID: If more than one DVR is connected on the same RS485 bus, each one must have a unique ID.
Click the CONTROL DEVICE menu and select the
SYSTEM ID, PTZ Protocol and camera
BAUD RATE.
33