Output Color; Select Tray; Sided Copying - Dell C2665dnf User Manual

Output Color

To select mode for color or black and white copying:
1 Tap Output Color.
2 Tap Full Color or Black & White.
NOTE:
Color copy is secured with a password if the Function Enabled setting for
. If you set
Password)
On(Color Password)

Select Tray

To select the tray:
1 Tap Select Tray.
2 Tap the desired setting, and then tap OK.
MPF
Tray1*
Tray2
* Denotes the factory default setting.
NOTE: Tray2
is only available when the optional 550-sheet feeder is installed.
NOTE:
When is displayed as the paper size and type in the MPF, you can select the paper size and type from this
Any
menu. For details, see "Select Tray."

2 Sided Copying

To make duplex copies with the specified binding position:
1 Swipe the screen until 2 Sided Copying appears, and then tap 2 Sided Copying.
2 Tap the desired setting, and then tap OK.
1 → 1 Sided* Select 1 sided or 2 sided and specify binding position for the 2 sided copy.
1 → 2 Sided
2 → 1 Sided
2 → 2 Sided
Long Edge Binding
Short Edge Binding
* Denotes the factory default setting.
When you are using the document glass and it is set to 1 → 2 Sided or 2 → 2 Sided, the display prompts you
for another page after tapping Copy.
If you want to place a new document, replace the document with a new document, and then tap Continue.
a
If you finish copying, tap Print Now.
b
NOTE:
When you use the DADF to copy both sides of a document, the printed position of the front and back of the document
may differ if the size in the document size setting and the size of the document do not match. In this case, set
to the same size as the document.
Size
to
Output Color Full Color
, you will need to enter the four digit password.
The paper is fed from the multipurpose feeder.
The paper is fed from tray1.
The paper is fed from the optional 550-sheet feeder.
is set to
Copy On(Color
and the Function Enabled setting for to
Copy
Original
329
Copying