Copy Printer Settings - Dell C2665dnf User Manual

802.1x
Purpose:
To specify the settings for IEEE 802.1x authentication for encrypted communication to the printer.
Values:
Configure 802.1x Enable IEEE 802.1x
Authentication Method EAP-MD5
Login Name: (Device
Name)
Password
Re-enter Password
Certificate Validation
IP Filter (IPv4)
Purpose:
To specify the IP address and subnet mask to be permitted or denied access to the printer.
Values:
Access List Address
Address Mask
Active Mode
SMTP Domain Filtering
Purpose:
To specify whether to restrict sending e-mails to specific domains only.
NOTE:
This feature does not restrict sending e-mails through the E-Mail Alert feature.
Values:
SMTP Domain Filtering Domain Filtering
Allow Domain List

Copy Printer Settings

The Copy Printer Settings menu includes the Copy Printer Settings and Copy Printer Settings Report pages.
Select the check box to enable IEEE 802.1x authentication.
Selects the authentication method to use for IEEE
802.1x authentication.
EAP-MS ­
CHAPv2
PEAP/MS­
CHAPv2
Sets the login name (device name) for IEEE 802.1x authentication using
up to 128 alphanumeric characters.
Sets the login password for IEEE 802.1x authentication using up to 128
alphanumeric characters.
Confirms the set login password.
Select the check box to enable Certificate Validation.
Sets the IP addresses that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Sets the subnet mask that are permitted or denied access to the printer. Enter a
numeric value between 0 and 255 in each field.
Reject Rejects printing from specified network address.
Accept Permits printing from specified network address.
Off Disables the IP Filter feature for the specified IP address.
Select the check box to enable Domain Filtering.
Allows you to register up to five domains allowed for sending e-mails.
Dell™ Printer Configuration Web Tool
175