Dell C2665dnf User Manual page 172

*1
For encryption, AES or TKIP method is used.
*2
This item is available only when Infrastructure is selected for Network Type.
*3
For authentication and encryption by digital certificate, AES or TKIP method is used.
*4
To activate the setting, import a certificate which supports wireless LAN (server/client) on the SSL/TLS pages, and enable the relevant
certificate in advance.
*5
When Auto is selected for Transmit Key, the key set specified for WEP Key 1 is used.
Wi-Fi Direct
Purpose:
To configure the detailed setting of the Wi-Fi Direct connection.
Values:
Wi-Fi Direct Wi-Fi Direct
Group Role
Device Name
WPS Setup
SSID (Character string Specifies a name to identify the Wi-Fi Direct network. Up to 32
following "DIRECT-
**")
Passphrase
IP Address
Subnet Mask
Paired Device
Current Role
Current SSID
Reset Print Server
Purpose:
To initialize NVRAM (non-volatile RAM) for the network feature and reboot the printer. You can also initialize
NVRAM of the printer from Reset Defaults in the Printer Settings menu.
Values:
Initialize NIC NVRAM Memory
and restart printer.
Restart Printer
Security
The Security tab includes Set Password, Authentication System, Kerberos Server, LDAP Server, LDAP
Authentication, LDAP User Mapping, SSL/TLS, IPsec, 802.1x, IP Filter (IPv4), and SMTP Domain Filtering.
170
Dell™ Printer Configuration Web Tool
Sets whether to enable the Wi-Fi Direct connection.
Sets the group role of the printer.
Specifies the printer name that identifies the Wi-Fi Direct network with up
to 32 alphanumeric characters. Confirm it when selecting the printer name
on your Wi-Fi mobile device.
Configures the Wi-Fi Direct network using WPS.
alphanumeric characters can be entered. "DIRECT-" cannot be changed.
Displays the passphrase. Confirm it when entering the passphrase into your
Wi-Fi mobile device.
Displays the IP address of the Wi-Fi Direct adapter.
Displays the subnet mask.
Displays the mobile name currently connected.
Displays the current group role of the printer.
Displays the current SSID. Confirm it selecting the Wi-Fi Direct network
name on your Wi-Fi mobile device.
Click Start to initialize NVRAM, revert network settings to the factory default settings, and
reboot the network capability.
Click Start to reboot the printer.