Dell C2665dnf User Manual page 173

Set Password
Purpose:
To set or change the password that is required to access the setup parameters of the printer from the Dell Printer
Configuration Web Tool. This page can also be displayed by clicking Set Password in the left frame.
NOTE:
To restore the password to the default (NULL), initialize the non-volatile memory (NVM).
NOTE:
You can set the password for access to
Values:
Administrator Password
Re-enter Administrator Password
Access denial by the authentication
failure of the Administrator
Authentication System
Purpose:
To specify the server authentication type, the server response time-out, or the search time-out.
Values:
Authentication Type Authentication System
(for Server Address/ Settings
Phone Book)
Optional Information Server Response Time-
Out
Search Time-Out
Kerberos Server
Purpose:
To specify the settings for the Kerberos server.
Values:
Kerberos Server (for IP Address / Host Name
Server Address/Phone & Port
Book)
Domain Name
Login Name
Password
Re-enter Password
Admin Settings
Sets the password using up to 128 alphanumeric characters.
Confirms the set password.
Sets the amount of time the administrator should wait for the access to the printer
setup from Dell Printer Configuration Web Tool. Sets the time period from 5 to 255
seconds. The access is denied if the time-out time is exceeded. If you set 0, this mode
is disabled.
Select the authentication system from the list.
Sets the amount of time the printer should wait for response from the
server. Sets the time period from 1 to 75 seconds.
Sets the amount of time the printer should wait for searching for the server.
Sets the time period from 5 to 120 seconds.
Sets the IP address or host name, and the port address. The port address
must be 88 or between 5,000 and 65,535.
Enter the domain name.
Enter the login name.
Enter the login password.
Enter the login password again to confirm it.
from Panel Lock in Printer Settings.
Dell™ Printer Configuration Web Tool
171