Dell C2665dnf User Manual page 230

Gateway Address
IPsec
NOTE:
IPsec feature is available only when IPsec is enabled on the Dell Printer Configuration Web Tool.
Purpose:
Disables IPsec.
Reset Wireless
NOTE:
Reset Wireless feature is available only when the printer is connected using the wireless network.
Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network
settings are reset to their default values.
Connection Speed
NOTE:
Connection Speed feature is available only when the printer is connected using the wired network.
Purpose:
To specify the communication speed and the duplex settings of Ethernet. The change becomes effective after the
printer is turned off and then on again.
Values:
*
Auto
10BASE-T Half
10BASE-T Full
100BASE-TX Half
100BASE-TX Full
1000BASE-T Full
Wi-Fi Direct
NOTE:
When the optional wireless adapter is attached and the Ethernet cable is disconnected, Wi-Fi Direct is displayed.
Purpose:
To configure the Wi-Fi Direct network settings.
Values:
Wi-Fi Direct Disable
Enable
Group Role Auto
Group Owner
228
Understanding the Printer Menus
When an IP address is being set manually, the gateway address is specified
using the format nnn.nnn.nnn.nnn. Each octet that makes up
nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the
range of 224 to 254 cannot be specified for the first octet of a gateway
address.
Detects the Ethernet settings automatically.
Uses 10BASE-T Half-duplex.
Uses 10BASE-T Full-duplex.
Uses 100BASE-TX Half-duplex.
Uses 100BASE-TX Full-duplex.
Uses 1000BASE-T Full-duplex.
*
Disables the Wi-Fi Direct network.
Enables the Wi-Fi Direct network.
Automatically resolves the group role for Wi-Fi Direct.
*
Sets the printer as the Group Owner when using Wi-Fi Direct. Setting the
printer to become the group owner makes it possible for devices to discover
this printer. The SSID of the printer will be then displayed in the list of
wireless networks on your Wi-Fi mobile device.