Dell C2665dnf User Manual page 242

Power Saver Timer
Purpose:
To specify the time for transition to power saver mode.
Values:
Sleep 10 minutes
Available Range: 1–30 minutes
Deep Sleep 20 minutes
Available Range: 1–30 minutes
When you specify 1 minute for Sleep, the printer enters power saver mode 1 minute after it finishes a job. This
uses much less energy, but requires more warm-up time for the printer. Specify 1 minute if your printer shares an
electrical circuit with room lighting and you notice lights flickering.
Select a high value if your printer is in constant use. In most circumstances, this keeps the printer ready to operate
with minimum warm-up time.
Select a value between 1 and 30 minutes for power saver mode if you want a balance between energy consumption
and a shorter warm-up period.
The printer automatically returns to the standby mode from the power saver mode when it receives data from the
computer or remote fax machine. You can also change the status of the printer to the standby mode by pressing any
button on the operator panel.
Date & Time
Purpose:
To specify the date and time formats.
Values:
Time Zone
Date
Format
Time
Format
mm / inch
Purpose:
To specify the default measurement unit displayed after the numeric value on the operator panel.
Values:
*
Millimeters(mm)
Inches(")
NOTE:
The default for
mm/inch
240
Understanding the Printer Menus
*
Specifies the time taken by the printer to enter Sleep mode after it
finishes a job.
*
Specifies the time taken by the printer to enter Deep Sleep mode after it
has entered Sleep mode.
Sets the time zone.
Sets the date depending on the
Sets the date format.
Sets the time.
12 Hour Sets the time in 12-hour format.
24 Hour Sets the time in 24-hour format.
Selects millimeter as the default measurement unit.
Selects inch as the default measurement unit.
varies depending on other settings, such as
Format settings.
and
Country Document Size
.