Dell C2665dnf User Manual page 374

Option
Sent Fax Forward
2 Sided Print
Remote Receive
Discard Size
Transmission Auto Redial Setup Redial Attempts
Defaults
372
Faxing
Description
You can set your printer to forward incoming faxes to another fax
number, or forward them to an e-mail address. When a fax arrives
at your printer, it is stored in the memory. Then, the printer dials
the fax number you have specified in
or sends an e-mail to the address you have specified in
Forwarding E-mail Address 1-5
To forward to a fax number, you need to register a fax number on
Forwarding Number. To forward to an e-mail address, you
need to register information on
Forwarding E-mail Address
mail alert, see "E-Mail Server" and on forwarding number and e ­
mail address, see "Fax Settings."
Tap not to forward incoming faxes.
Off
Tap Forward
error occurs during forwarding a received fax, the printer prints the
fax.
Tap
Print and Forward
faxes.
Tap Print and E-mail
to e-mail.
Tap Forward to Server
server.
Tap
Print and Forward to Server
forward incoming faxes to server.
You can set whether to make duplex print when you print faxes.
Tap Off to print faxes on one side of a sheet of paper.
Tap to print faxes on both sides of a sheet of paper.
On
You can receive a fax by pressing the remote receive code on the
external telephone after picking up the handset of the telephone.
When you set
remote receive code in
When receiving a document as long as or longer than the paper
installed in your printer, you can set the printer to discard any
excess at the bottom of the page. If the received page is outside
the margin you set, it will print on two sheets of paper at the
actual size. When the document is within the margin and
Discard Size
reduces the document to fit it onto the appropriate sized paper
and discard does not occur. If
than Auto Reduction
discarded.
You can specify the number of redial attempts to make when the
destination fax number is busy, within the range of 0 to 13. If you
enter 0, the printer will not redial.
Interval of Redial Your printer can automatically redial a remote fax machine if it
was busy. Intervals from 1–15 minutes can be entered.
Resend Delay You can specify the interval between transmission attempts within
the range of 3 to 255 seconds. The default is 8 seconds.
Forwarding Number
E-Mail Server
. For information on e­
to forward incoming faxes without printing. If an
to forward and print incoming
to print and forward incoming faxes
to forward incoming faxes to
Remote receive to On , specify a two digit
Remote Receive Tone
is set to
Auto Reduction
Discard Size
, the data within the margin will be
.
and
to print and
.
, the printer
is set to other