Tray Management - Dell C2665dnf User Manual

Adjust Altitude 0 meter
1000 meters
2000 meters
3000 meters
Apply New Settings
Restart printer to apply new settings

Tray Management

Purpose:
To specify the paper types and sizes, and the tray priority for the MPF, tray1, and the optional 550-sheet feeder
respectively.
Values:
Tray Settings MPF Display Tray
Prompt
MPF Use Driver
Settings for Print Job Off
MPF Paper Size
MPF Custom Size -
*1
Y
MPF Custom Size -
*1
X
MPF Paper Type
198
Understanding the Tool Box Menus
On
Off
On
*1
A4 (210x297mm)
A5 (148x210mm)
B5 (182x257mm)
Letter (8.5x11")
Folio (8.5x13")
Legal (8.5x14")
Executive (7.3x10.5")
Envelope #10 (4.1x9.5")
Monarch Env. (3.9x7.5")
DL Env. (110x220mm)
C5 Env. (162x229mm)
Custom Size
Available Range:
127–355 mm (5.0–14.0 inches)
Available Range:
77–215 mm (3.0–8.5 inches)
*1
Plain
Plain Thick
2
Covers(106–163g/m )
Covers Thick(164–216g/m
2
Coated(106–163g/m )
Coated Thick(164–216g/m
Label
Envelope
Sets the altitude of the location where the
printer is installed.
After you change the settings, click this button
to apply the changes.
Click this button to apply the changes.
Displays a popup message that prompts the user
to set Paper Type and Paper Size when the paper
is loaded in the MPF.
Sets whether to use the printer driver settings
for the size and type of paper loaded in the MPF.
Sets the size of paper loaded in the MPF.
Sets the length of custom size paper loaded in
the MPF.
Sets the width of custom size paper loaded in
the MPF.
Sets the type of paper loaded in the MPF.
2
)
2
)