System Settings - Output Settings - Dell C2665dnf User Manual

System Settings - Output Settings

Purpose:
To configure the setting of the print ID, substitute tray, and other settings.
Values:
Default Paper Size A4 (210x297mm)
Letter (8.5x11")
Print ID Off
Top Left
Top Right
Bottom Left
Bottom Right
Print Text On
Off
Banner Sheet Insert Off
Position
Front
Back
Front & Back
Banner Sheet Specify Tray MPF
Tray 1
Tray 2
Substitute Tray Off
Larger Size
Nearest Size
Use MPF
Letterhead 2 Sided Disable
Enable
Enable A4<>Letter On
Switch
Off
Report 2 Sided Print 1 Sided
2 Sided
Use Another Tray On
Off
Apply New Settings
Restart printer to apply new settings
*1
This item is available only when the optional 550-sheet feeder is installed.
196
Understanding the Tool Box Menus
*1
Sets the default paper size.
Does not print the user ID.
Prints the user ID on the specified location.
Prints the received PDL data as text data.
Does not print the received PDL data as text data.
Does not insert the banner sheet.
Sets where to insert the banner sheet.
Sets the tray for the banner sheet.
No tray size substitute accepted.
Substitutes paper of next largest size. When there is no
larger paper size, the printer substitutes paper of nearest
size.
Substitutes paper of nearest size.
Substitutes paper from the MPF.
Does not print on both sides of a sheet of letterhead paper.
Prints on both sides of a sheet of letterhead paper.
Prints A4 size jobs on Letter size paper if A4 is not
available in the paper trays and vice versa (Letter size job
on A4 size paper).
Does not print A4 size jobs on Letter size paper or Letter
size jobs on A4 paper.
Prints reports on one side of a sheet of paper.
Prints reports on both sides of a sheet of paper.
Sets to show a message to select another tray when the
specified paper is not available in the paper tray.
Does not print on other paper sizes in other paper trays if
the paper size specified in the job is not available.
After you change the settings, click this button to apply
the changes.
Click this button to apply the changes.