Dell C2665dnf User Manual page 136

Auto Receive Answer/Fax
Junk Fax Setup
2 Sided Printing
Remote Receive
Remote Receive Tone
Discard Size
Sent Fax Forward
Forwarding Number
Forwarding E-mail
Address 1
Forwarding E-mail
Address 2
Forwarding E-mail
Address 3
Forwarding E-mail
Address 4
Forwarding E-mail
Address 5
Server Type
Server Address
Server Port Number
Share Name
Server Path
Redial Attempts
Interval of Redial
Resend Delay
Tone/Pulse
Prefix Dial
Prefix Dial Number
Fax Cover Page
Fax Header
ECM
Modem Speed
Display Manual Fax
Recipients
Fax Activity
Fax Transmit
134
Dell™ Printer Configuration Web Tool
Displays the interval at which the printer goes into the fax mode after
the external answering machine receives an incoming call.
Displays whether to reject faxes sent from unwanted stations.
Displays whether to print on both sides of a sheet of paper.
Displays whether to receive faxes by pressing a remote receive code on
the external telephone.
Displays the 2-digit remote receive code when Remote Receive is On.
Displays whether to delete text or images at the bottom of a fax page
when the entire page does not fit onto the output paper.
Displays whether to forward incoming faxes to a specified destination.
Displays the fax number of the destination to which incoming faxes are
to be forwarded.
Displays the e-mail address to which incoming faxes are to be
forwarded.
Displays the e-mail address to which incoming faxes are to be
forwarded.
Displays the e-mail address to which incoming faxes are to be
forwarded.
Displays the e-mail address to which incoming faxes are to be
forwarded.
Displays the e-mail address to which incoming faxes are to be
forwarded.
Displays the server type.
Displays the server address registered under the server ID.
Displays the assigned server port number.
Displays the assigned shared name.
Displays the assigned server path.
Displays the number of redial attempts to make if the destination fax
number is busy.
Displays the interval between redial attempts.
Displays the interval between re-send attempts.
Displays whether to use tone or pulse dialing.
Displays whether to set a prefix dial number.
Displays a prefix dial number. This number dials before any auto dial
number is started. It is useful for accessing the Private Automatic
Branch Exchange (PABX).
Displays whether to attach a cover page to faxes.
Displays whether to print the information of the sender on the header
of faxes.
Displays whether the Error Correction Mode (ECM) is enabled.
Displays the modem speed.
Displays whether to show the fax number of the recipient on the
Sending Fax screen when manually sending a fax.
Displays whether to automatically print a fax activity report after every
50 incoming and outgoing fax communications.
Displays whether to print a transmission result after a fax transmission.