Dell C2665dnf User Manual page 141

Machine Ready Tone
Copy Completed Tone
Job Completed Tone
Fault Tone
Alert Tone
Out of Paper Tone
Low Toner Alert Tone
Auto Clear Alert Tone
NFC Authentication Tone
All Tones
Low Toner Alert Message
OffHook Wake Up
Auto Log Print
RAM Disk
Panel Language
Max E-mail Size
Auto Reset
Fault Time-out
Default Paper Size
Print ID
Print Text
Banner Sheet Insert Position
Banner Sheet Specify Tray
Substitute Tray
Letterhead 2 Sided
A4<>Letter Switch
Report 2 Sided Print
Use Another Tray
Sets the volume of the tone that is emitted when the printer becomes ready,
or disables the tone.
Sets the volume of the tone that is emitted when a copy job is complete, or
disables the tone.
Sets the volume of the tone that is emitted when a job other than a copy job
is complete, or disables the tone.
Sets the volume of the tone that is emitted when a job ends abnormally, or
disables the tone.
Sets the volume of the tone that is emitted when a problem occurs, or
disables the tone.
Sets the volume of the tone that is emitted when the printer runs out of
paper, or disables the tone.
Sets the volume of the tone that is emitted when the toner is low, or
disables the tone.
Sets the volume of the tone that is emitted 5 seconds before the printer
performs auto clear, or disables the tone.
Sets the volume of the tone that is emitted when an NFC card is placed on
the NFC reader for authentication, or disables the tone.
Sets the volume of all the alert tones, or disables all the tones.
Alerts you if the toner is low.
Sets whether to wake up from Sleep or Deep Sleep mode when you pick up
the handset of the external telephone.
Sets if a job history needs to be printed after every 20 jobs.
Sets whether to allocate RAM for the file system for the Secure Print, Proof
Print, Private Mail Box Print, and Public Mail Box Print features.
Used to set the language on the touch panel.
Sets the maximum size of e-mail that can be sent. The available range is
from 50 to 16384 (KB) (Default: 2048).
Sets the amount of time before the printer automatically resets its settings
to the defaults when no additional settings are made.
Sets the amount of time the printer waits before canceling a job that stops
abnormally.
Sets the default print paper size.
Sets where to print the user ID on the output paper.
Sets whether the printer outputs PDL data (which is not supported by the
printer) as text when the printer receives it.
Sets where to insert a banner sheet in the output.
Sets from which tray a banner sheet is fed.
Sets whether to use another size paper when the paper that is loaded in the
specified tray does not match the paper size settings for the current job.
Sets whether to print on both sides of letterhead.
Sets whether to print A4 size jobs on Letter size paper if A4 is not available
in the paper trays and vice versa (Letter size job on A4 size paper).
Sets whether to print reports on both sides a sheet of paper.
Sets whether to show a message to select another tray when the specified
paper is not available in the paper tray.
Dell™ Printer Configuration Web Tool
139