Table of Contents
Advertisement
*9 Off-line data collection capability [16Fh]
Bit
0
1
2
3
4
5 to 7
*10
SMART capability flag [170-171h]
Bit
0
1
2-15
*11
Drive error logging capability [172h]
Bit
0
1 to 15
*12
Quick Test completion time [minutes]
This value indicates the processing time of the Quick Test (off-line mode).
*13
Comprehensive Test completion time [minutes]
5 - 58
03h: Self Test has been aborted for a final error.
04h: Self Test has been completed abnormally for an unknown meaning.
05h: Self Test has been completed abnormally by Write/Read Test.
06h: Self Test has been completed abnormally by servo analysis.
07h: Self Test has been completed abnormally by Read Scan Test
08h-0Eh:
Reserved
0Fh: Self Test is being performed.
If this bit is set to 1, it indicates SMART EXECUTE OFF-LINE
IMMEDIATE subcommand is supported. (FR register = D4)
Vendor unique
If this bit is set to 1, it indicates off-line data collection being
aborted when a new command is received.
If this bit is set to 1, it indicates SMART off-line read scanning is
supported.
If this bit is set to 1, it indicates SMART Self Test is supported.
Reserved bits
If this bit is set to 1, it indicates the attribute data is saved to the
media before the drive enters power save mode.
If this bit is set to 1, it indicates the device saves the attribute
automatically according to fixed operation.
Reserved bits
If this bit is set to 1, it indicates the drive error logging is
supported.
Reserved bits
C141-E110-02EN
Description
Description
Description
Advertisement
Table of Contents
