Fujitsu MPG3xxxAT Product Manual page 123

*2 Attribute ID
The attribute ID is defined as follows:
Attribute ID (Dec)
0
1
2
3
4
5
6
7
8
9
10
11
12
13 to 198
199
200
201 to 255
*3 Status flag
Bit
0
1
2
3
4
5
6 to 15
5 - 56
(Indicates unused attribute data)
Read error rate
Throughput performance
Spin up time
Number of times the spindle motor is activated
Number of alternative sectors
Read channel margin (Not supported)
Seek error rate
Seek time performance
Power-on time
Number of retries made to activate the spindle motor
Number of retries to calibration
Number of turn on/off times
Reserved
Ultra ATA CRC Error Rate
Write error rate
(Vendor unique)
If this bit is set to 1, it indicates the attribute is guaranteed for
normal operation when an attribute value exceeds the threshold.
If this bit is set to 1 (0), it indicates the attribute is updated only
by on-line test (off-line test).
If this bit is set to 1, it indicates a performance attribute.
If this bit is set to 1, it indicates an error-rate attribute.
If this bit is set to 1, it indicates an event count attribute.
If this bit is set to 1, it indicates the attribute shall be collected
and saved even if the failure prediction feature is disabled.
Reserved bits
C141-E110-02EN
Description
Description