Removing And Replacing The Battery In The Socket - HP Integrity rx2660 User's & Service Manual

4. Replace the top access cover. See

Removing and Replacing the Battery in the Socket

To replace the system or iLO 2 MP battery in the socket:
1. Remove the top access cover. See
2. Remove the power supply housing from the system board. Place the power supply housing
on an ESD protected surface.
IMPORTANT:
removed. Removal allows unobstructed access to carefully remove and replace the battery.
Figure 76 Power Supply Housing Removed For Battery Access
"Replacing the Top Cover" (page 142)
"Removing the Top Cover" (page
Do not remove or replace the battery until the power supply housing has been
Removing and Replacing the System or iLO 2 MP Battery 185
142).