Ioconfig; Syntax; Parameters; Operation - HP Integrity rx2660 User's & Service Manual

NOTE: The last remaining configured CPU in a server cannot be deconfigured.
Example 9 cpuconfig command
Shell> cpuconfig
PROCESSOR INFORMATION
CPU Speed
--- -------
0 1.6Ghz
1 1.6Ghz

ioconfig

Use this command to deconfigure or reconfigure I/O components or settings.

Syntax

ioconfig <fast_init | mps_optimize | wol> <on | off>

Parameters

<fast_init>
<mps_optimize> specify PCIe MPS optimization setting
<wol>
<on|off>

Operation

The ioconfig file is used to retain information on the server I/O configuration across reboots.
The ioconfig file is created by insf at install time; and is modified by insf, rmsf, and ioscan
when devices are added or removed. The only purpose of the ioconfig file to maintain
configuration information when the system is not running.
Proc
Rev Model
--------- -------
B1 0
B1 0
specify device connection policy setting
specify system wake-on-lan setting
specify to configure or deconfigure a feature or component
Arch Processor
Family Rev State
----- ------ -----
31 0 Sched Deconf
31 0 Active
EFI/POSSE Commands 221