User Interface; Event Ids For Errors And Events; Controls, Ports, And Leds; Front Panel Controls, Ports, And Leds - HP Integrity rx2660 User's & Service Manual

The Office Friendly server firmware supports the HP-UX 1 1i version 3, February 2007 release,
Linux, Windows, and OpenVMS 8.3 operating systems through the Itanium processor family
standards and extensions, and has no operating system-specific functionality included.
All operating systems are presented with the same interface to system firmware, and all features
are available to the operating system.

User Interface

The Itanium processor family firmware employs a user interface defined by an HP standard called
Pre-OS System Startup Environment (POSSE). The POSSE shell is based on the EFI standard shell.
Several commands were added to the standard EFI Shell to support HP value-added functionality.

Event IDs for Errors and Events

The system firmware generates event IDs for errors, events, and forward progress to the Integrated
Lights Out 2 Management Processor (iLO 2 MP) through common shared memory. The iLO 2 MP
interprets and stores event IDs. Reviewing these events helps you diagnose and troubleshoot
problems with the server.

Controls, Ports, and LEDs

This chapter provides a basic description of the controls, ports, and LEDs found on the front panel
and rear panel of the server. For more information on LED functions and descriptions, see
"Troubleshooting" (page

Front Panel Controls, Ports, and LEDs

The front panel of the server provides the controls, ports, and LEDs commonly used when the server
is operational.
Figure 5 Front Panel Controls, Ports, and LEDs
System Insight Display LEDs
1
DVD LED
2
VGA port
3
26 Overview
104).
USB port
4
Server status LEDs
5
Power button
6
Chapter 5:
SAS disk drive LEDs
7
Office Friendly server label
8