Server Specifications; System Configuration - HP Integrity rx2660 User's & Service Manual

2 Server Specifications

This chapter provides the specifications for the HP Integrity rx2660 server.
For more site preparation information, see the HP website and search for Generic Site Preparation
Guidelines.

System Configuration

Table 14 Hardware Specifications
Component
Processors
Memory
Disk drives
PCI slots
SAS core I/O
LAN core I/O
Management core I/O
Optical device
Power supply
One or two Itanium single- or dual-core processors:
1.6 GHz/6 MB cache single-core processor
1.4 GHz/12 MB cache dual-core processor
1.6 GHz/18 MB cache dual-core processor
1.6 GHz/12 MB cache single-core processor
1.42 GHz/12 MB cache dual-core processor
1.67 GHz/18 MB cache dual-core processor
Supports up to eight Double Data Rate 2 (DDR2) DIMMs mounted on the system board.
Supported DIMM sizes are as follows:
512 MB
1 GB
2 GB
4 GB
8 GB
Minimum memory configuration is 1 GB (2 x 512-MB DIMMs).
Maximum memory configuration is 64 GB (8 x 8-GB DIMMs).
One to eight hot-pluggable SAS hard drives.
For the PCI-X I/O backplane assembly:
One PCI-X slot @ 133 MHz
Two PCI-X slots @ 266 MHz
For the PCIe/PCI-X I/O backplane assembly:
One PCI-X slot @ 133 MHz
Two PCIe slots @ PCIe x8
Eight port SAS core I/O card, or eight port SAS core I/O card with RAID expansion card.
Two GigE LAN ports.
Two serial ports, two USB 2.0 ports, one 10 Base-T/100 Base-T LAN port, and one optional
VGA port.
One DVD-R or DVD+RW.
The Data Center server has one 900 watt (@120 VAC) or 1000 watt (@240 VAC) power
supply, 1+1 redundancy with second power supply.
The Office Friendly configuration includes two power supplies.
HP Integrity rx2660
System Configuration 35