Completing The Connections; Connecting A Single System Drawer - Gateway 7400 Rack Mounting Instructions

Completing the connections

Now that the system drawer is installed in the cabinet, it is time to make the
system connections.
Important

Connecting a single system drawer

To connect the peripherals:
1
Turn off all system drawers and devices in the cabinet before attaching
any of the system drawer cables.
2
Connect all I/O device cables (keyboard, mouse, video, serial, and
parallel) to their respective ports on the back of the system drawer.
The system board connectors may appear different than in the
illustration, depending on your system board.
To power source
Mouse
Keyboard
A wide variety of system connections are possible. Your
actual system connections may be different from the
following examples.
SCSI bus
To
monitor
To printer
Tape storage
drawer
Mouse and
keyboard tray
Completing the connections
21