Table of Contents
Advertisement
To remove the outriggers and the feet:
1
Turn the server upside down.
2
If outriggers are installed, use your fingers or a flat-bladed screwdriver to
lift up on both of the retaining latches, then slide the outrigger towards
the center of the bottom panel.
3
Remove the outrigger by pulling it up and away from the server.
Retaining latches
4
Remove the second outrigger by repeating Steps 2 and 3.
5
Using a flat-bladed screwdriver, remove the feet.
4
Installation
Outriggers
Retaining latches
Foot
Advertisement
Table of Contents
